Detection of long bones based on Barker code excited ultrasonic guided waves

Single pulse excited ultrasonic guided wave surfers high attenuation during the propagation in long bones.This results in small amplitude and low signal-to-noise ratio(SNR)of measured signals.Thus,the Barker code excitation is introduced into long bone detection to improve the quality of received signals,due to its efficiency in increasing amplitude and SNR.Both simulation and in vitro experiment were performed,and the results were decoded by the weighted match filter(WMF) and the finite impulse response- least squares inverse filter(FIRLSIF),respectively.The comparison between the results of Barker code excitation and sine pulse excitation was presented.For 13-bit Barker code excitation,WMF produced 13 times larger amplitude than sine pulse excitation,while FIR-LSIF achieved higher peak-sidelobe-level(PSL) of —63.59 dB and better performance in noise suppression.The results show that the Barker code excited guided waves have the potential to be applied to the long bone detection.     

Study on the mean trabecular bone spacing based on fundamental frequency estimation method

Ultrasonic backscatter signals from the cancellous bone can be used to diagnose osteoporosis effectively due to its ability to provide the information of bone microstructure. Mean trabecular bone spacing(MTBS)is one of the important parameters for characterization of bone microstructure.This paper proposed a MTBS estimating method based on the fundamental frequency estimation,which was applied to backscatter signals from simulations, and in vitro bovine trabeculae.The estimated MTBS were compared with those of simplified inverse filter tracking(SIFT)algorithm and autoregressive(AR)cepstrum method.The results demonstrated that the proposed method is very robust for the MTBS estimation with more precise estimates and smaller estimated variance in the presence of a small signal-to-noise ratio (SNR),and a large scattering strength ratio of diffuse scatterers to regular ones.     

基频估计算法研究平均骨小梁间距

超声背散射信号能提供松质骨微结构信息从而能有效的诊断骨质疏松,而平均骨小梁间距(MTBS)是表征松质骨微结构的重要参数之一.本文提出了一种基频估计的MTBS估计算法,对仿真信号和离体牛胫骨松质骨中的超声背散射信号分别进行分析处理,并和现有的两种算法(简易反向滤波跟踪(SIFT)算法和AR倒谱法)进行比较.实验结果表明基频估计算法对噪卢和随机散射回波有更好的鲁棒性,在信噪比较低和随机散射回波幅度较大时估计值更加精确,且有很好的方差性能.充分说明了本文算法是一种有效的MTBS估计算法.     

吡咯亚胺配体与过渡金属的反应性及其催化烯烃聚合

在经典的Brookhart吡啶双亚胺后过渡金属烯烃聚合催化剂基础上,用吡咯五元环代替吡啶六元环骨架可得到具有不同电子效应的新型吡咯亚胺配体.通过吡咯环特殊的电子效应和位阻效应可设计出种类繁多的有别于吡啶亚胺配体的配合物.综述了吡咯亚胺配体与前过渡金属(Ti,Zr等)、后过渡金属(Fe,Co,Ni,Pd等)、稀土金属(Y...     

骨折长骨中超声导波传播特性的仿真研究

采用超声导波评价长骨骨折已成为近两年来的一个研究热点.本文采用混合边界元方法(HBEM)对超声导波在骨裂长骨中的传播情况以及各导波模式的反射系数和透射系数进行了数值分析.研究结果表明,入射导波模式经由裂纹处模式转换后依然保持为主要接收模式不变.对某一裂纹,各模式透射系数常在相近的频率点上达到局部峰值.对于不同深宽比(d/w)裂纹,某些模式透射系数曲线局部峰值所对应的频率存在着相互错开的现象,这些结果可用于选择最优入射导波模式和频率,以便更好地定量评价骨质以及骨裂状况.     

Hydrothermal Synthesis and Crystal Structure of a Novel Polyoxometalate K(C_4N_2H_(12))_4(C_4N_2H_(11))_(2-)[Mo_8~ⅤMo_4~ⅥCdP_8O_(54)(OH)_8]F·6H_2O

The title compound 1 has been synthesized by the reaction of H_2MoO_4, CdCl_2, H_3PO_4, KF, piperazine hexahydrate and water in aqueous solution under mild hydrothermal conditions. Single-crystal X-ray analysis reveals that the title compound crystallizes in the triclinic system, space group P(-1) with a = 14.049(3), b = 15.972(3), c = 20.043(4) (A), α = 85.82(3), β = 81.28(3),γ = 67.15(3)°, V= 4095.9(14) (A)~3, M_r = 3204.62, Z=2,D_c = 2.598 g/cm~3,μ = 2.360 mm~(-1), F(000) = 3124, the final R = 0.0314, wR = 0.0826 and S = 0.989 for 18592 observed reflections with I > 2σ(I). The crystal packing is stabilized by N-H…O and O-H…O intra- and intermolecular hydrogen bonds to form an infinite 3D network.     

A Simple and Rapid Label-free Fluorimetric “Turn Off-on” Sensor for Cadmium Detection Using Glutathione-capped CdS Quantum Dots

A convenient label-free fluorescence(FL) nanoprobe for rapid detection of cadmium(Cd) was established using glutathione-capped CdS quantum dots(QDs) and 1,10-phenanthroline(phen). The prepared CdS QDs exhibited a strong FL emission at 536 nm, which could be quenched by phen due to the photoinduced hole transfer(PHT) mechanism. The existence of Cd effectively recovered the FL intensity of CdS QDs, which was due to the easy detachment of phen from the surface of QDs to form[Cd(phen)₂(H₂O)₂]²⁺ in solution. Cd concentrations were linearly correlated with the FL intensity in the range of 0.0625-1.25 μmol/L under the optimized conditions and the detection limit was 0.01 μmol/L. Finally, the Cd concentration was accurately quantified in real water sample using the proposed sensor.     

二氧化铈纳米球的合成

使用尿素水热法合成了均匀的二氧化铈球型纳米材料.纳米球是由纳米层以及纳米颗粒所构成的核壳结构,其平均粒径为320nm,同时表面主要暴露{111}晶面.尿素水解所产生的氨气分子为纳米球状结构的形成提供了模板,而生成的碳酸根与氢氧根离子作为铈离子的沉淀剂.使用氢气程序升温还原技术表征了氧化铈纳米球材料的氧化还原能力,同时以一氧化碳氧化为探针反应研究了其催化性能.     

纳米尺度CeO2在多相催化反应中的形貌效应

CeO2的催化性能不仅与粒子大小有关,而且与其形貌密切相关. 本文分析了CeO2的纳米结构和氧化还原特性,综述了CeO2在催化反应中的形貌效应,着重介绍了CeO2的结构和形貌对CO氧化、水气变换和乙醇水蒸气重整制氢以及二元醇脱水反应活性的影响.